District of Columbia
The District of Columbia has enacted a Stormwater Ordinance in order to establish minimum stormwater management requirements and controls to protect and safeguard the general health, safety, and welfare of the public residing in watersheds within this jurisdiction. The District of Columbia is the permitting authority for all land disturbing activities and requires the land owner to maintain all on-site stormwater control facilities and all open space areas (e.g. parks or “green” areas) required by the approved stormwater control plan. The District of Columbia will only provide construction permits to projects that establish a plan to manage stormwater runoff occurring during the construction process. The District of Columbia, under the NPDES program, also has the authority to inspect properties for noncompliance and can issue a notice of violation (NOV) for any deficiency or infraction onsite. Property owners are responsible for the maintenance of any stormwater facilities or practices located on the property. The District of Columbia has the authority to inspect stormwater facilities and practices in order to ascertain that they are properly maintained and functioning.
1.1 Introduction The District of Columbia (District), like most ultra-urban areas, experiences increased stormwater runoff that results from development. This runoff places a burden on sewer systems and degrades aquatic resources when it is not managed adequately. Unmanaged stormwater runoff overloads the capacity of streams and storm sewers and is responsible for increased combined sewer overflow events and adverse downstream impacts, such as flash flooding, channel erosion, surface and groundwater pollution, and habitat degradation. Recognizing this issue, the District first adopted stormwater management regulations in 1988. These regulations, Chapter 5 of Title 21 of the District of Columbia Municipal Regulations (21 DCMR), established requirements to manage both stormwater quality and quantity. Quality control focused on the removal of pollutants from up to the first 0.5 inch of stormwater runoff, often referred to as the “first flush.” Quantity control was mandated through detention requirements based on the 2-year, 24-hour storm event for stream bank protection (widely accepted as the channel shaping flow) and the 15-year, 24-hour storm event for flood protection (the typical design capacity of the District’s sewer conveyance system). In 2013, the District’s stormwater management regulations shifted its stormwater quality standard to a retention-based standard. Major land-disturbing activities must retain the volume from a 1.2-inch storm event, and major substantial improvement activities must retain the volume from a 0.8-inch storm event. By keeping stormwater on site, retention practices effectively provide both treatment and additional volume control, significantly improving protection for District waterbodies. The Stormwater Retention Volume (SWRv) can be managed through runoff prevention (e.g., conservation of pervious cover or reforestation), runoff reduction (e.g., infiltration or water reuse), and runoff treatment (e.g., plant/soil filter systems or permeable pavement). The Stormwater Management Guidebook (SWMG) provides technical guidance on the 2013 and 2019 revisions to the 1988 regulations.
1.2 Purpose and Scope The purpose of the SWMG is to provide the technical guidance required to comply with the District’s stormwater management regulations, including the criteria and specifications engineers and planners use to plan, design, and construct regulated sites and stormwater best management practices (BMPs). It is the responsibility of the design engineer to review, verify, and select the appropriate BMPs and materials for a specific project and submit to DOEE, as required, all reports, design computations, worksheets, geotechnical studies, surveys, rights-of-way determinations, etc. Each such required submittal will bear the seal and signature of the professional engineer licensed to practice in the District who is responsible for that portion of the project.
Declaration of Covenants. A declaration of covenants is required that includes all maintenance responsibilities to ensure the continued stormwater performance for the BMP. The declaration of covenants specifies the property owner’s primary maintenance responsibilities, and authorizes DOEE staff to access the property for inspection or corrective action in the event the proper maintenance is not performed. The declaration of covenants is recorded in the District of Columbia land records. A template form is provided at the end of Chapter 5, “Administration of Stormwater Management Rules” (see Figure 5.11), although variations will exist for situations in which stormwater crosses property lines. The covenant is between the property owner and the Government of the District of Columbia. It is submitted through the Office of the Attorney General. All SWMPs have a maintenance agreement stamp that must be signed for a building permit to be issued. A maintenance schedule must appear on the SWMP. Additionally, a maintenance schedule is required to be included as an exhibit to the declaration of covenants. Covenants are not required on government properties, but maintenance responsibilities must be either signed by the Responsible Person for Maintenance on a partnership agreement or be identified in a memorandum of understanding that is incorporated into the plan submission.
What is stormwater?
Stormwater is excessive rainfall that does not soak into the ground, but instead flows over the land’s hard surface into the nearest water body through storm drain channels.
Why is stormwater a problem?
Stormwater is a problem because it carries a lot of pollution along with it wherever it flows. In urban areas such as the District, much of the land is covered by impervious surfaces such as streets, buildings, parking lots and driveways. During rain storms, these impervious surfaces prevent rainfall from soaking into the soil. Instead, this stormwater drains into manmade drainage systems consisting of inlets and underground pipes commonly referred to as “storm sewers.” These storm sewers are not to be confused with sanitary sewers that transport human and industrial wastewaters to a treatment plant before discharging to surface waters. Stormwater entering storm sewers does not receive any treatment before it enters the Potomac and Anacostia Rivers and Rock. Learn more about why stormwater is a problem.
What do we do about stormwater?
DOEE seeks to reduce stormwater runoff pollution by going beyond the activities required in the District’s National Pollution Discharge Elimination System (NPDES) Permit – more commonly referred to as a Municipal Separate Storm Sewer System (or MS4) Permit. The Stormwater Management Division of the Natural Resources Division within DOEE is responsible for managing the most recent District NPDES Permit [PDF]. DOEE initially assumed responsibility for the District’s stormwater administration in February 2007, and now has in place a vigorous stormwater program as overseen by the Stormwater Division in conjunction with all its sister agencies. You may also consult the District's Stormwater Guidebook , and the most recent MS4 Annual Report. DOEE works together with its sister agencies in two group settings: both the Stormwater Advisory Panel (a groups of all agency Directors, City Administrator); and the Technical Working Group who meets monthly to keep current on activities that effectively reduce stormwater throughout the City.
How do we do it?
As an environmental initiative to reduce stormwater runoff, the Department of Energy and Environment has created its RiverSmart Programs which provide District property owners with financial and technical incentives to install stormwater retrofit practices in their houses, schools, and neighborhoods.
DOEE also offers DC residents with resources to learn more about how they can help to achieve an Eco-Friendly Living in the District.
DOEE’s RiverSmart programs help to reduce stormwater runoff that harms the District’s waterways and the Chesapeake Bay. RiverSmart programs provide financial incentives to help District property owners install green infrastructure such as rain barrels, green roofs, rain gardens, permeable pavers, shade trees, and more. These practices allow rainwater to stay on site and soak into the ground, where natural processes help remove pollutants.
No matter how large or small your green infrastructure project is, there is a RiverSmart program for you. Some programs offer a site evaluation and up-front funding, while others provide a rebate or a discount. Read about the programs below to find out which one is right for you.
Explore DOEE’s many RiverSmart programs below.
Incentives to install green infrastructure:
- RiverSmart Homes: for single-family residential properties - offers rain barrels, shade trees, rain gardens, bay scaping, permeable pavers and more.
- RiverSmart Communities: for 501(c)(3) non-profit organizations and houses of worship
- RiverSmart Schools: for schools—offers technical support, professional development, field trips to local rivers, community planting events, and assistance with installing outdoor classrooms
- RiverSmart Rooftops: (also known as the Green Roof Rebate Program): for all properties that install green roofs
- RiverSmart Rebates: for property owners who do not want to wait for a stormwater audit through RiverSmart Homes, want to hire their own contractor, or want to “do-it-yourself” (prior approval required)
- Trees: rebates up to $100 to individuals who purchase and plant trees on private residential or commercial property
- Rain barrels: rebates of $2 per gallon for rain barrels, with a maximum rebate of $1,000
- Rain Gardens: rebates of $3 per square foot of area treated by a rain garden, with a maximum rebate of $2,200
- Permeable Surface: rebates of $10 per square foot of impervious surface removed and replaced with permeable pavers and $5 per square foot of impervious surface removed and replaced with vegetation
Financial benefits for installed green infrastructure:
- RiverSmart Rewards: provides a discount of up to 55% off DOEE’s Stormwater Fee and up to 20% off DC Water’s Clean Rivers Impervious Area Charge
- Stormwater Retention Credit Trading Program: properties that manage stormwater voluntarily or above the regulatory requirement are eligible to sell Stormwater Retention Credits in an open market